(8) [Action] page
Sets the operation after the condition has been satisfied.
[Break]:
[Trace]:
[Performance start]:
Figure 5.40 [Chx (Reset)] Dialog Box ([Action] Page)
Breaks after conditions have been matched.
Enables [Trace option] and sets the AUD trace operation.
[Trace start]: Starts AUD trace after conditions have been matched.
[Trace stop]: Stops AUD trace after conditions have been matched.
[Trace get]: Acquires AUD trace after conditions have been matched.
Starts or ends AUD performance measurement after conditions
have been matched. When this option is selected, [Performance
option] is enabled and the time interval of the performance
measurement can be specified.
Sampling time: Specifies the time interval of the AUD
195