4.5 Connecting the Emulator
Select either of the following two ways to connect the emulator:
(a) Connecting the emulator after the setting at emulator activation
Select [Debug settings] from the [Options] menu to open the [Debug Settings] dialog box. It is
possible to register the download module or the command chain that is automatically executed
at activation. For details on the [Debug Settings] dialog box, refer to section 4.3, Setting at
Emulator Activation.
When the dialog box is closed after setting the [Debug Settings] dialog box, the emulator will
automatically be connected.
(b) Connecting the emulator without the setting at emulator activation
Connect the emulator by simply switching the session file to one in which the setting for the
emulator use has been registered.
122
Figure 4.35 Selecting the Session File