Section 4 Preparations for Debugging
4.1 System Check
When the software is executed, use the procedure below to check that the emulator is connected
correctly. Here, use the workspace for a tutorial provided on the product.
1. Connect the emulator to the host machine.
2. Connect the user system interface cable to the connector of the emulator.
3. Connect the user system interface cable to the connector in the user system.
4. Turn on the user system.
5. Turn on the emulator.
6. Select [Renesas] -> [High-performance Embedded Workshop] -> [High-performance
Embedded Workshop] from [Programs] in the [Start] menu.
Figure 4.1 [Start] Menu
Note: The [High-performance Embedded Workshop] -> [Tools] is not displayed depending on
the user's environment.
95