Table of Contents
Advertisement
5.2
Downloading a Program
This section describes how to download a program and view it as source code or assembly-
language mnemonics.
Note: After a break has occurred, the High-performance Embedded Workshop displays the
location of the program counter (PC). In most cases, for example if an Elf/Dwarf2-based
project is moved from its original path, the source file may not be automatically found. In
this case, the High-performance Embedded Workshop will open a source file browser
dialog box to allow you to manually locate the file.
5.2.1
Downloading a Program
A load module to be debugged must be downloaded.
To download a program, select the load module from [Debug -> Download] or select [Download]
from the popup menu opened by clicking the right-hand mouse button on the load module in
[Download modules] of the [Workspace] window.
Notes: 1. Before downloading a program, it must be registered to the High-performance
Embedded Workshop as a load module. For registration, refer to section 4.3, Setting at
Emulator Activation.
2. When a program is downloaded to the external RAM, the bus controller must be
initially set in the area for downloading. Especially, check that the initialization of
SDRAM or the setting of the bus width is appropriate for the user system.
148
Advertisement
Table of Contents
