[Start]:
[End]:
[Outside]:
Notes: 1. This page is only displayed when [Branch trace data] is specified on the [General]
page.
2. The address range can only be specified for AUD event channels Ch1 and Ch2.
3. The mask address can be input for [Start] when the single address is specified.
4. The mask address cannot be input for [Start] and [End] when the address range is
specified.
186
Sets the single address or the start address of the address range.
Sets the end address of the address range.
Sets other value than that has been set for the single address or address
range as the condition.