Table of Contents
Advertisement
(b) Setting the trace acquisition condition
The following is an example of acquiring branch source and branch destination information.
For acquiring other trace information, refer to section 5.6, Using the Eventpoints.
Select and double-click [Ch12 (Branch)] on the [Onchip Event] sheet of the [Event] window. The
[Event condition 12] dialog box will appear.
Select the type of branch information. After selecting [Acquire trace] on the [Action] page, click
the [OK] button.
Figure 6.46 [Event condition 12] Dialog Box
Note: The items that can be set in this dialog box differ according to the product. For details on
the settings for each product, refer to the online help.
339
Advertisement
Table of Contents
