Table 1.1 Emulator Functions
No.
Item
1
User program execution
function
2
Reset function
3
Event detection
functions
4
Trace functions
Function
•
Executes a program with the operating frequency within a
range guaranteed by devices.
•
Reset emulation
•
Step functions:
Single step (one step: one instruction)
Source-level step (one step: one-line source)
Step over (a break did not occur in a subroutine)
Step out (when the PC points to a location within a
subroutine, execution continues until it returns to the calling
function)
•
Issues a power-on reset from the High-performance
Embedded Workshop to the device during break.
•
13 on-chip event detection channels
•
Eight AUD event detection channels
•
Six external-bus event detection channels
•
Other event detection
One execution time event detection channel
One external probe event detection channel
•
Other event detection functions on the basis of I/O-analyzed
results
•
Internal trace function at on-chip event detection
•
AUD trace function at AUD event detection
•
Outputs memory of the internal trace data
•
External bus trace function at external bus event detection
•
Other trace acquisition functions with the I/O analyzer
21