Table of Contents
Advertisement
[Mode]
[Emulation mode]
[Step option]
[UBC mode]
[PPC mode]
[Memory area]
Displays the MPU name.
Selects the emulation mode at user program execution.
[Hardware break disable]: Disables hardware breaks generated
[Hardware break enable]: Enables hardware breaks generated
[No break]: Temporarily disables PC breakpoint or break
condition settings during emulation.
Sets the step interrupt option.
[Disable interrupts during single step execution]:
*1
Disables interrupts
[Enable interrupts during single step execution]:
*1
Enables interrupts
during step execution.
Sets the UBC mode.
[EML]: The UBC is used as an Onchip event function by the
emulator.
[User]: Releases the UBC to the users.
Sets the PPC mode.
[EML]: The PPC is used as a performance counter by the
emulator.
[User]: Releases the PPC to the users.
Sets the method to specify the address in the memory range.
[Normal]: Specifies the address depending on the MMU state.
[Physical]: Specifies the physical address.
[Virtual]: Specifies the virtual address.
in the emulator main unit case.
Functions to be disabled are AUD
Event break, BUS Event break,
Other Event break, and trace
overflow break.
in the emulator main unit case. In
this case, the Onchip Event
function and the monitoring
function of the physical address
during user program execution will
be disabled.
during step execution.
*2
*2
133
Advertisement
Table of Contents
