Table of Contents
Advertisement
Filtering conditions can be changed several times to analyze data because the content of the trace
buffer is not changed by filtering.
(1) [General] page
Set the range for filtering.
Figure 5.68 [Trace Filter] Dialog Box ([General] Page)
[Don't care other pages]: Only selects the cycle number when this box is checked. Other options
[Enable Filter]:
[Not designation]:
[Trace display range]:
[Start PTR]:
[End PTR]:
Note: Along with setting the range for filtering, PTR values to start and end filtering can be set
in the [Start PTR] and [End PTR] options, respectively.
236
become invalid.
Enables the filter when this box is checked.
Filters information that does not match the conditions set in those pages
when this box is checked.
Sets the range for filtering.
Enters a PTR value to start filtering.
Enters a PTR value to end filtering.
Advertisement
Table of Contents
