Table of Contents
Advertisement
6.18.2 Setting the Sequential Onchip Eventpoint
The sequential break is enabled by the combination of Onchip Eventpoints.
Set the satisfaction conditions of Onchip Eventpoint as follows:
Ch1(IA_OA):
Ch2(IA_OA_DT_CT):
Follow the setting method described in the previous section.
To set these eventpoints as sequential:
• Select [Sequential Setting] from the popup menu by clicking the [Event] window with the
right-hand mouse button. The [Sequential setting] dialog box will open.
Note: The items that can be displayed in this dialog box differ according to the product. For the
items that can be displayed, refer to the online help.
A break condition is satisfied immediately before when an instruction
of address H'00001084 is executed.
A break condition is satisfied immediately before when an instruction
of address H'0000106C is executed.
Figure 6.40 [Sequential setting] Dialog Box
331
Advertisement
Table of Contents
