Table of Contents
Advertisement
For an operation when an event has been detected, a break or external bus trace
acquisition/acquisition start/acquisition stop can be specified.
This function can be set in the [BUS Event] sheet of the [Event] window.
Notes: 1. When a break is generated by detecting the external bus event, there is a delay of
several cycles from the time of detection to the break.
2. This function is optional; it is available when a trace unit (optional) is used.
(d) Other events (Other Event)
This function can be set in the [Other Event] sheet of the [Event] window.
•
Execution time event
A break occurs after the specified execution time has passed. There is one event detection
channel.
•
External probe event
There is one event detection channel. Eventpoints can be defined specifying four external
probe signals via the probe cable as the condition.
For an operation when an event has been detected, a break or AUD trace
acquisition/acquisition start/acquisition stop can be specified.
Note: There is a delay of several cycles from the time of detection to the break.
•
Events by the peripheral I/O analyzer
Events can be detected with the peripheral I/O analyzer function.
Notes: 1. There is a delay of several cycles from the time of detection to the break.
2. This function is optional; it is available when a peripheral I/O unit (optional) is used.
26
Advertisement
Table of Contents
