Table of Contents
Advertisement
5.6.9
Editing Breakpoint or Eventpoint
Select a break condition to be modified, and choose [Edit...] from the popup menu to open the
dialog box for the point, which allows the user to modify the breakpoints or eventpoints. The
[Edit...] menu is only available when one breakpoint or eventpoint is selected.
5.6.10
Enabling Breakpoint or Eventpoint
Select a breakpoint or an eventpoint and choose [Enable] from the popup menu to enable the
selected breakpoint or eventpoint.
5.6.11
Disabling Breakpoint or Eventpoint
Select a breakpoint or an eventpoint and choose [Disable] from the popup menu to disable the
selected breakpoint or eventpoint. When a breakpoint or an eventpoint is disabled, a condition will
not be satisfied when the specified conditions have been satisfied.
5.6.12
Deleting Breakpoint or Eventpoint
Select a breakpoint or an eventpoint and choose [Delete] from the popup menu to delete the
selected breakpoint or eventpoint. To retain the break condition but not have it cause an event
when its conditions are met, use the [Disable] option (see section 5.6.11, Disabling Breakpoint or
Eventpoint).
Select a breakpoint or an eventpoint and click [Delete] from the popup menu. Deletes the selected
breakpoint(s) or eventpoint(s). To retain the details of the breakpoint or eventpoint but not have it
satisfy the condition when its conditions are met, use the [Disable] option (see section 5.6.11,
Disable Breakpoint or Eventpoint).
5.6.13
Deleting All Breakpoints or Eventpoints
Choose [Delete All] from the popup menu to delete all breakpoints or eventpoints.
5.6.14
Viewing the Source Line for Breakpoints or Eventpoints
Select a breakpoint or an eventpoint and choose [Go to Source] from the popup menu to open the
[Source] or [Disassembly] window at the address of the breakpoint or eventpoint. The [Go to
Source] menu is only available when one breakpoint or eventpoint that has the corresponding
source file is selected.
214
Advertisement
Table of Contents
