Connecting The Optional Units To The Emulator Main Unit Case; Connecting The E200F Trace Unit To The User System - Renesas SH-4A User Manual

2.3 Connecting the Optional Units to the Emulator Main Unit Case

Optional units are included in the emulator. This section describes how to connect them to the
E200F main unit case.

2.3.1 Connecting the E200F Trace Unit to the User System

• Open the cover of TRACE I/F on the side of the main unit case.
• Connect the trace cable provided for the trace unit to the emulator as shown in figure 2.2.
Figure 2.2 Connecting the Trace Cable to E200F
59