Table of Contents
Advertisement
13. If no reset signal is detected, the following dialog box is displayed.
When the [Ignore] button is clicked, the emulator issues a reset in the CPU for initiation.
However, this method is unavailable for some products. For details, refer to section 2.2,
Specific Functions for the Emulator when Using the SHxxxx, in the additional document,
Supplementary Information on Using the SHxxxx.
14. When "Connected" is displayed in the [Output] window of the High-performance Embedded
Workshop, the emulator initiation is completed.
100
Figure 4.9 [Can not find /RESET signal] Dialog Box
Figure 4.10 [Output] Window
Advertisement
Table of Contents
