Renesas SH-4A User Manual page 226

(2) [Data] page
Specifies the data bus condition.
[Data]:
[Don't care]:
[Read/Write]: Sets the read or write cycle as the condition.
[Read]:
[Write]:
[Value]:
[Outside]:
202
Figure 5.44 [Chx (Delay)] Dialog Box ([Data] Page)
Sets the data condition.
Sets no data condition.
Sets the read cycle as the condition.
Sets the write cycle as the condition.
Sets the data bus value (mask data can be input).
Sets other value than that has been set for [Value] as the condition.