Figure 5.85 [Performance Analysis BUS Channel x] Dialog Box
[Measurement Method]:
[Count Up Mode]:
[Start Range]:
252
Specifies the measurement mode.
[Specified Range measurement]:
Measurement within the specified range.
[Start Point to End Point measurement]:
Measurement between specified addresses.
[Start Range to End Range measurement]:
Measurement between specified ranges.
Specifies the counting-up method of execution counts.
[start condition and end condition are satisfied]:
Counted up when the end condition is satisfied after the start
condition has been satisfied.
[end condition is satisfied]:
Counted up whenever the end condition is satisfied.
Sets the measurement condition or the measurement start
condition for Start Range to End Range measurement.
[Start Address]: Enters the start address.