Hiding The [Monitor] Window - Renesas SH-4A User Manual

Microcomputer development environment system
Hide thumbs Also See for SH-4A:
Table of Contents

Advertisement

The [R] mark shows that the value of the variable can be updated during user program execution.
For reading of memory and updating of the content of the variable that has been registered in the
[Watch] window during execution of the user program, there are following two methods:
1. Use the monitoring function without halting the user program
The value of the variable is updated by using the monitoring function of the emulator.
2. Temporarily stops the user program and reads the memory contents to update the value
Note: The realtime operation is disabled because the user program is stopped temporarily.
It is possible to recognize the method for updating the value during execution of the user program
according to the color of the [R] mark.
Blue [R]:
Black [R]:
Notes: 1. This function can be set per variable or per element or body for structures of data.
2. The information is lost when it is scrolled out of the [Watch] window and when the
window is closed.
3. A variable that is allocated to a register cannot be selected for monitoring.
4. The realtime watch function is realized by using the AUD monitoring function. It is
thus possible to monitor four areas in total by the AUD monitoring function and the
realtime update function of the [Watch] window.

5.3.6 Hiding the [Monitor] Window

When using the Monitor function to monitor the value of a variable from the [Watch] window,
hide the [Monitor] window for the effective use of the screen.
The current monitoring information is listed as the submenu when selecting [Display -> CPU ->
Monitor]. The list consists of the [Monitor] window name and the address to start monitoring.
When the left of the list is checked, the [Monitor] window is being displayed.
Selecting items of the [Monitor] window you want to hide from the monitor setting list displays no
[Monitor] window and removes the check mark at the left of the list.
An updated value of the data at this location has been read by the monitoring
function.
A value has been updated by reading the normal data.
163

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sh4al-dspE200f

Table of Contents