Table of Contents
Advertisement
(a) Connecting the emulator after the setting at emulator activation
Select [Debug settings] from the [Options] menu to open the [Debug Settings] dialog box. It is
possible to register the download module or the command chain that is automatically executed
at activation. For details on the [Debug Settings] dialog box, refer to section 4.3, Setting at
Emulator Activation.
After the [Debug Settings] dialog box has been set, when the dialog box is closed, the emulator
is connected.
(b) Connecting the emulator without the setting at emulator activation
The emulator can be easily connected by switching the session file that the setting for the
emulator use has been registered.
In the list box that is circled in figure 4.25, select the session file name including the character
string that has been set in the [Target name] text box in figure 4.24, [New Project – Step 8] dialog
box. The setting for using the emulator has been registered in this session file.
After selected, the emulator is automatically connected.
112
Figure 4.25 Selecting the Session File
Advertisement
Table of Contents
