Changing The Functions When Using The Expansion Profiling Unit - Renesas SH-4A User Manual

2.7.3

Changing the Functions when Using the Expansion Profiling Unit

Select the item in the [Option board mode setting] combo box of the [Function select] dialog box.
• [RealProfile Area2 (function mode)]: Measures accumulation of execution time of each
function; the subroutine execution time is not included.
• [RealProfile Area2 (nest mode)]: Measures accumulation of execution time of each function;
the subroutine execution time is also included.
• [Coverage (8M)]: Acquires the information on the C0 coverage in the 8-Mbyte areas.
Note: When the expansion profiling unit is not connected to the emulator, this combo box is
displayed in gray.
80
Figure 2.21 [Function select] Dialog Box