(b) Setting the trace acquisition condition
The setting for the acquisition condition of the memory output trace function is the same as that of
the internal trace function. Refer to section 6.19.1 (1), Internal trace function.
(c) Displaying the trace result
Run the program as shown in the example of section 6.17.1, PC Break Function. The trace results
are displayed in the [Internal/AUD/Usermemory trace] window after the program execution is
completed.
The following is an example of the trace display.
Figure 6.54 [Internal/AUD/Usermemory trace] Window (Example)
351