Executing [Step Over] Command - Renesas SH-4A User Manual

6.15.3 Executing [Step Over] Command

The [Step Over] command executes a function call as a single step and stops at the next statement
of the main program.
• Move to the change function following the procedures described in section 6.15.1, Executing
[Step In] Command.
• To step through all statements in the change function at a single step, select [Step Over] from
the [Debug] menu, or click the [Step Over] button on the toolbar.
Figure 6.28 [High-performance Embedded Workshop] Window (Step Over)
Figure 6.27 [Step Over] Button
319