Items that can be displayed in this page are listed below.
[Multi analysis mode setting]
[AUD data bus width]
Note: In some products, the bus width will be fixed. For the specifications of each product, refer
to the online help.
136
Displays the functions of the E200F main unit. Here, this item
displays which function of realtime profiling, coverage, or I/O
analyzer has been selected.
[RealProfile Area 1 (function mode)]:
The realtime profiling function (measurement mode: function
mode) is selected.
[RealProfile Area1 (nest mode)]:
The realtime profiling function (measurement mode: nest
mode) is selected.
[Coverage (4M)]:
The coverage function is selected.
<Depending on the product>:
Uses the I/O analyzer function.
Sets the AUD data bus width.*
The bus width can be selected as 4 bits or 8 bits.