Table of Contents
Advertisement
Items that can be displayed in this page are listed below.
[Bus board mode setting]
[Multiplexed pins setting...]
[Memory type setting...]
138
Displays the function of the trace unit.
[Trace/break 6ch (Trace 262144 cycles)]:
The external bus trace or break function has been selected
(event detection channels: six). The 262144 bys cycles can be
acquired by a trace.
[Performance 6ch]:
The external bus trace function has been selected
(measurement channels: six).
[Emulation memory (4M, Trace 8192 cycles)]:
The external emulation memory function (4 Mbytes x 1 block)
has been selected. The 8192 bys cycles can be acquired by a
trace.
Selects the state of the multiplexed pins.
Selects the type of memory for each area or the content of
connection. Select [Normal] for other than SRAM with byte
control.
Advertisement
Table of Contents
