Table of Contents
Advertisement
3.4 Diagnostic Procedure
This section describes how to set up and execute the diagnostic program and output the result.
3.4.1 Installing the Diagnostic Program
(1) Opening \SOT\R0E0200FxEMU00\Setup.exe
• Execute Setup.exe from the \SOT\R0E0200FxEMU00 directory of the CD-R.
Open \SOT\R0E0200F0EMU00\Setup.exe and \SOT\R0E0200F2EMU00\Setup.exe for
R0E0200F0EMU00 and R0E0200F2EMU00, respectively.
• Follow the cues given by the installation wizard to install the software.
3.4.2 Executing the Diagnostic Program
The following describes how to execute the diagnostic program.
1. Connect the emulator to the host machine; not to the user system.
2. Turn on the emulator.
3. Select [E200F TM] -> [E200F Fx TM] (x: 0 or 2) from [Programs] in the [Start] menu.
4. The diagnostic program of the emulator is started and the initial screen (figure 3.6) is
displayed.
5. Select [COMPONENT]. Do not select [TARGET].
6. Click the [USER TEST MODE] button. Do not select [QA TEST MODE].
89
Advertisement
Table of Contents
