BUS event column
The BUS event column displays the following item:
: An external bus break is set.
: An external bus sequential break is set.
: An external bus trace acquisition is set.
: An external bus trace start is set.
: An external bus trace stop is set.
: An external bus trace sequential stop is set.
The bitmap symbols for break above are shown by double-clicking the BUS event column. These
are also set by using the popup menu.
Note: The contents of the BUS event column are erased when conditions other than the address
condition are added to each channel by using the [Edit] menu or in the [Event] window.
S/W breakpoint column
Editor column displays the following items:
: A bookmark is set.
: A PC breakpoint is set.
: PC location
152
Figure 5.13 Popup Menu for the BUS event Column