Ospfv3 Timer Hello - H3C IE4300 Command Reference Manual

Default
The OSPFv3 neighbor dead time is 40 seconds for P2P and broadcast interfaces, and is 120
seconds for P2MP and NBMA interfaces.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Specifies the dead time in the range of 1 to 65535 seconds.
seconds
instance instance-id
Usage guidelines
If an interface receives no hello packet from a neighbor within the dead time, the interface
determines that the neighbor is down.
The dead time must be a minimum of four times the hello time and must be identical on interfaces
attached to the same network segment.
Examples
# Set the OSPFv3 neighbor dead time to 60 seconds for VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospfv3 timer dead 60
Related commands

ospfv3 timer hello

ospfv3 timer hello
Use
ospfv3 timer hello
Use
undo ospfv3 timer hello
Syntax
ospfv3 timer hello seconds [ instance instance-id ]
undo ospfv3 timer hello [ instance instance-id ]
Default
The hello interval is 10 seconds for P2P and broadcast interfaces, and is 30 seconds for P2MP or
NBMA interfaces.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Specifies the hello interval in the range of 1 to 65535 seconds.
seconds
instance instance-id
: Specifies an instance by its ID in the range of 0 to 255. The default is 0.
to set the hello interval for an interface.
to remove the configuration.
: Specifies an instance by its ID in the range of 0 to 255. The default is 0.
73