H3C IE4300 Command Reference Manual page 1688

Predefined user roles
network-admin
Parameters
interface [ interface-type interface-number ]
number. If you do not specify an interface, this command clears packet filtering statistics for all
interfaces.
: Specifies the inbound direction.
inbound
: Specifies the outbound direction.
outbound
: Specifies the IPv6 ACL type.
ipv6
: Specifies the Layer 2 ACL type.
mac
acl-number
•
2000 to 2999 for basic ACLs.
•
3000 to 3999 for advanced ACLs.
•
4000 to 4999 for Layer 2 ACLs.
name acl-name
string of 1 to 63 characters.
Usage guidelines
If
acl-number
filtering statistics for all ACLs.
To specify the IPv4 ACL type, do not specify the
Examples
# Clear IPv4 basic ACL 2001 statistics for inbound packet filtering on GigabitEthernet 1/0/1.
<Sysname> reset packet-filter statistics interface gigabitethernet 1/0/1 inbound 2001
Related commands
display packet-filter statistics
display packet-filter statistics sum
rule (IPv4 advanced ACL view)
Use to create or edit an IPv4 advanced ACL rule.
rule
Use
undo rule
Syntax
rule [ rule-id ] { deny | permit } protocol [ { { ack ack-value | fin fin-value |
psh psh-value | rst rst-value | syn syn-value | urg urg-value } * |
established } | counting | destination { dest-address dest-wildcard | any } |
destination-port operator port | { dscp dscp | { precedence precedence | tos
tos } * } | fragment | icmp-type { icmp-type [ icmp-code ] | icmp-message } |
logging | source { source-address source-wildcard | any } | source-port
operator
vpn-instance-name ] *
undo rule rule-id [ { { ack | fin | psh | rst | syn | urg } * | established } |
counting | destination | destination-port | { dscp | { precedence | tos }
* | fragment | icmp-type | logging | source | source-port | time-range |
vpn-instance ] *
: Specifies an ACL by its number. The following are available value ranges:
: Specifies an ACL by its name. The
, ,
name acl-name
to delete an entire IPv4 advanced ACL rule or some attributes in the rule.
port | time-range
acl-name
, or is not specified, this command clears the packet
ipv6 mac
ipv6 or mac
time-range-name
19
: Specifies an interface by its type and
argument is a case-insensitive
keyword.
| vpn-instance