H3C IE4300 Command Reference Manual page 1503

Parameters
: Displays detailed information. If you do not specify the keyword, this command displays
verbose
brief information.
vlan vlan-id
VLAN, this command displays dynamic router port information for all VLANs.
slot slot-number
member device, this command displays dynamic router port information for the master device.
Examples
# Display brief information about dynamic router ports for VLAN 2.
<Sysname> display igmp-snooping router-port vlan 2
VLAN 2:
Router ports (2 in total):
GE1/0/1
GE1/0/2
# Display detailed information about dynamic router ports for VLAN 2.
<Sysname> display igmp-snooping router-port vlan 2 verbose
VLAN 2:
Router slots (0 in total):
Router ports (2 in total):
GE1/0/1
GE1/0/2
Table 4 Command output
Field
VLAN 2
Router slots (0 in total)
Router ports (2 in total)
(00:01:30)
Related commands
reset igmp-snooping router-port
display igmp-snooping static-group
Use
display igmp-snooping static
snooping group entries.
Syntax
display igmp-snooping static
[ vlan vlan-id ] [ verbose ] [ slot slot-number ]
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a
: Specifies an IRF member device by its member ID. If you do not specify a
Description
VLAN ID.
Member IDs and total number of the member devices that have dynamic
router ports, except for the specified member device or the master device
when no member device is specified.
Dynamic router ports and total number of dynamic router ports.
Remaining aging time for the dynamic router port.
For a global port, this field is always displayed.
For a global port, this field is displayed when one of the following conditions
exists:
•
The port is on the specified member device.
•
The port is on the master device and no member device is specified.
(00:01:30)
(00:00:23)
(00:01:30)
(00:00:23)
- to display information about static IGMP
group
-
group [ group-address | source-address ] *
7