source source-address
multicast source, this command displays host tracking information for all multicast sources.
slot slot-number
member device, this command displays host tracking information for the master device.
Examples
# Display tracking information for hosts that have joined multicast group 224.1.1.1 in VLAN 2.
<Sysname> display igmp-snooping host-tracking vlan 2 group 224.1.1.1
VLAN 2
(0.0.0.0, 224.1.1.1)
Port: GE1/0/1
Host
1.1.1.1
2.2.2.2
Table 3 Command output
Field
VLAN
(0.0.0.0, 224.1.1.1)
Port
Host
Uptime
Expires
Related commands
host-tracking
igmp-snooping enable
igmp-snooping host-tracking
display igmp-snooping router-port
Use
display igmp-snooping router-port
Syntax
display igmp-snooping router-port [ vlan vlan-id ] [ verbose ] [ slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
: Specifies a multicast source by its IP address. If you do not specify a
: Specifies an IRF member device by its member ID. If you do not specify a
Description
VLAN ID.
(S, G) entry, where 0.0.0.0 in the S position means any multicast sources.
Member port.
IP address of the host.
Length of time elapsed since the host joined the multicast group.
Remaining timeout time for the host. The host timeout time is the same as
the aging timer for the port. The timer is reset when the port receives an
IGMP report from the host.
This field displays timeout if the host times out.
(IGMP-snooping view)
Uptime
00:02:20
00:02:21
to display dynamic router port information.
6
Expires
00:00:40
00:00:39