H3C IE4300 Command Reference Manual page 1452

Predefined user roles
network-admin
Parameters
grrestarter-status-change
grhelper-status-change
if-state-change
if-cfg-error
if-bad-pkt
neighbor-state-change
nssatranslator-status-change
changes.
virtif-bad-pkt
virtif-cfg-error
virtif-state-change
virtgrhelper-status-change
changes of a virtual interface.
virtneighbor-state-change
virtual interface.
Examples
# Disable SNMP notifications for OSPFv3.
<Sysname> system-view
[Sysname] undo snmp-agent trap enable ospfv3
spf-schedule-interval
Use
spf-schedule-interval
Use
undo spf-schedule-interval
Syntax
spf-schedule-interval
[ incremental-interval ] ]
undo spf-schedule-interval
Default
The maximum SPF calculation interval is 5 seconds, the minimum interval is 50 milliseconds, and
the incremental interval is 200 milliseconds.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
maximum-interval
to 60 seconds.
: Specifies notifications about GR restarter state changes.
: Specifies notifications about GR helper state changes.
: Specifies notifications about interface state changes.
: Specifies notifications about error configuration of an interface.
: Specifies notifications about error messages received on an interface.
: Specifies notifications about neighbor state changes.
: Specifies notifications about error messages received on a virtual interface.
: Specifies notifications about error configuration of a virtual interface.
: Specifies notifications about virtual interface state changes.
: Specifies notifications about the neighbor state changes of a
to set the OSPFv3 SPF calculation interval.
: Specifies the maximum OSPFv3 route calculation interval in the range of 1
: Specifies notifications about NSSA translator state
: Specifies notifications about neighbor GR helper state
to restore the default.
maximum-interval
83
[ minimum-interval