H3C IE4300 Command Reference Manual page 1530

source-ip source-address
multicast source, this command configures the port as a simulated member host for a multicast
source and group. If you do not specify a multicast source, this command configures the port as a
simulated member host for a multicast group. This option takes effect on IGMPv3 snooping devices.
vlan vlan-id
: Specifies all multicast groups.
all
Usage guidelines
The version of IGMP running on a simulated member host is the same as the version of IGMP
snooping running on the port. The port ages out in the same way as a dynamic member port.
Examples
# Configure GigabitEthernet 1/0/1 as a simulated member host of the multicast source and group
(1.1.1.1, 232.1.1.1) in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping version 3
[Sysname-vlan2] quit
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] igmp-snooping host-join 232.1.1.1 source-ip 1.1.1.1 vlan
2
igmp-snooping host-tracking
Use
igmp-snooping host-tracking
Use
undo igmp-snooping host-tracking
Syntax
igmp-snooping host-tracking
undo igmp-snooping host-tracking
Default
Host tracking is disabled.
Views
VLAN view
Predefined user roles
network-admin
Usage guidelines
You must enable IGMP snooping for a VLAN before you execute this command for the VLAN.
You can enable host tracking for a VLAN in VLAN view or globally for all VLANs in IGMP-snooping
view. For a VLAN, the VLAN-specific configuration has the same priority as the global configuration.
Examples
# In VLAN 2, enable IGMP snooping, and then enable host tracking.
<Sysname> system-view
[Sysname] igmp-snooping
: Specifies a multicast source by its IP address. If you specify a
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
to enable host tracking for a VLAN.
to disable host tracking for a VLAN.
34