H3C IE4300 Command Reference Manual page 1567

[Sysname-vlan100] igmp-snooping enable
[Sysname-vlan100] quit
[Sysname] multicast-vlan 100
[Sysname-mvlan-100]
Related commands
igmp-snooping enable
multicast-vlan entry-limit
Use
multicast-vlan entry-limit
entries.
Use
undo multicast-vlan entry-limit
Syntax
multicast-vlan entry-limit limit
undo multicast-vlan entry-limit
Default
The maximum number of multicast VLAN forwarding entries is 500.
Views
System view
Predefined user roles
network-admin
Parameters
: Specifies the maximum number of multicast VLAN forwarding entries,in the range of 0 to
limit
500.
Usage guidelines
If the configured value is smaller than the current number of multicast VLAN forwarding entries, the
device cannot create new entries until some entries age out or are manually removed. To allow new
entries to be created immediately, use the
multicast VLAN forwarding entries.
Examples
# Set the maximum number of multicast VLAN forwarding entries to 128.
<Sysname> system-view
[Sysname] multicast-vlan entry-limit 128
Related commands
entry-limit
port (multicast-VLAN view)
Use to assign user ports to a multicast VLAN.
port
Use
undo port
Syntax
port interface-list
(IGMP-snooping view)
to delete user ports from a multicast VLAN.
to set the maximum number of multicast VLAN forwarding
to restore the default.
reset multicast-vlan group
6
command to remove