H3C IE4300 Command Reference Manual page 1510

display l2-multicast ip forwarding
Use
display l2-multicast ip forwarding
entries.
Syntax
display l2-multicast ip forwarding [ group group-address | source
source-address ] * [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group group-address
multicast group, this command displays Layer 2 multicast IP forwarding entries for all multicast
groups.
source source-address
multicast source, this command displays Layer 2 multicast IP forwarding entries for all multicast
sources.
vlan vlan-id
VLAN, this command displays Layer 2 multicast IP forwarding entries for all VLANs.
slot slot-number
member device, this command displays Layer 2 multicast IP forwarding entries for the master
device.
Examples
# Display Layer 2 multicast IP forwarding entries for VLAN 2.
<Sysname> display l2-multicast ip forwarding vlan 2
Total 1 entries.
VLAN 2: Total 1 entries.
(0.0.0.0, 224.1.1.1)
Host ports (3 in total):
GigabitEthernet1/0/1
GigabitEthernet1/0/2
GigabitEthernet1/0/3
Table 10 Command output
Field
Total 1 entries
VLAN 2: Total 1 entries
(0.0.0.0, 224.1.1.1)
Host ports (3 in total)
: Specifies a multicast group by its IP address. If you do not specify a
: Specifies a multicast source by its IP address. If you do not specify a
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a
: Specifies an IRF member device by its member ID. If you do not specify a
Description
Total number of Layer 2 multicast IP forwarding entries.
Total number of Layer 2 multicast IP forwarding entries in VLAN 2.
(S, G) entry, where 0.0.0.0 in the S position means all multicast sources.
Member ports and total number of member ports.
to display Layer 2 multicast IP forwarding
14