H3C IE4300 Command Reference Manual page 1749

2
3
4
5
6
7
Table 17 Command output
Field
Interface
Output queue
Group
Weight
qos wrr
Use
qos wrr
Use
undo qos wrr
Syntax
qos wrr weight
undo qos wrr weight
Default
An interface uses packet-count WRR queuing.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
: Allocates bandwidth to queues in packets.
weight
Usage guidelines
You must use the
queuing parameters for a queue on an interface.
Examples
# Enable packet-count WRR queuing on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr weight
Related commands
display qos queue wrr interface
af2
af3
af4
ef
cs6
cs7
Description
Interface type and interface number.
Type of the current output queue.
ID of the group a queue is assigned to.
Packet-count queue scheduling weight of a queue. N/A is displayed for a queue
that uses the SP scheduling algorithm.
to enable WRR queuing on an interface.
to restore the default.
command to enable WRR queuing before you can configure WRR
qos wrr
1 1
1 1
1 1
1 1
1 1
sp N/A
42