H3C IE4300 Command Reference Manual page 1713

[Sysname-classifier-class1] if-match dscp 1 6 9
# Define a match criterion for traffic class class1 to match IP packets.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match protocol ip
# Define a match criterion for traffic class class1 to match the packets with VLAN ID 2, 7, or 10 in the
outer VLAN tag.
<Sysname> system-view
[Sysname] traffic classifier class1 operator or
[Sysname-classifier-class1] if-match service-vlan-id 2 7 10
traffic classifier
Use
traffic classifier
existing traffic class.
Use
undo traffic classifier
Syntax
traffic classifier classifier-name [ operator { and | or } ]
undo traffic classifier classifier-name
Default
No traffic classes exist.
Views
System view
Predefined user roles
network-admin
Parameters
classifier-name
characters.
: Sets the operator to logic AND (the default) or OR for the traffic class.
operator
: Specifies the logic AND operator. The traffic class matches the packets that match all its
and
criteria.
: Specifies the logic OR operator. The traffic class matches the packets that match any of its
or
criteria.
Examples
# Create a traffic class named class1.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1]
Related commands
display traffic classifier
to create a traffic class and enter its view, or enter the view of an
to delete a traffic class.
: Specifies a name for the traffic class, a case-sensitive string of 1 to 31
6