H3C IE4300 Command Reference Manual page 1591

Syntax
entry-limit limit
undo entry-limit
Default
The maximum number of MLD snooping forwarding entries is 4294967295.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
: Specifies the maximum number of MLD snooping forwarding entries, in the range of 0 to
limit
4294967295.
Examples
# Set the global maximum number of MLD snooping forwarding entries to 512.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] entry-limit 512
fast-leave (MLD-snooping view)
Use
fast-leave
Use
undo fast-leave
Syntax
fast-leave [ vlan vlan-list ]
undo fast-leave [ vlan vlan-list ]
Default
Fast-leave processing is disabled.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
vlan vlan-list
VLAN by its ID or a range of VLANs in the form of
ID is in the range of 1 to 4094. If you do not specify a VLAN, this command takes effect for all VLANs.
Usage guidelines
The fast-leave processing feature enables the device to immediately remove a port from the
forwarding entry for an IPv6 multicast group when the port receives a done message.
You can enable fast-leave processing globally for all ports in MLD-snooping view or for a port in
interface view. For a port, the port-specific configuration takes priority over the global configuration.
to enable fast-leave processing globally.
to disable fast-leave processing globally.
: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a
start-vlan-id to end-vlan-id
19
. The VLAN