H3C IE4300 Command Reference Manual page 1573

MLD snooping commands
display ipv6 l2-multicast fast-forwarding cache
Use
display ipv6 l2-multicast fast-forwarding cache
multicast fast forwarding entries.
Syntax
display
[ ipv6-source-address | ipv6-group-address ] * [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id
ipv6-source-address
IPv6 multicast source, this command displays Layer 2 IPv6 multicast forwarding entries for all IPv6
multicast sources.
ipv6-group-address
argument is FFxy::/16 (excluding FFx1::/16 and FFx2::/16), where "x" and "y" represent any
hexadecimal numbers in the range of 0 to F. If you do not specify an IPv6 multicast group, this
command displays Layer 2 IPv6 multicast forwarding entries for all IPv6 multicast groups.
slot slot-number
member device, this command displays Layer 2 IPv6 multicast fast forwarding entries for the master
device.
Examples
# Display Layer 2 IPv6 multicast fast forwarding entries.
<Sysname> display ipv6 l2-multicast fast-forwarding cache
Total 1 entries, 1 matched
(1::6, FF1E::2)
Status
Source port : 9876
Protocol
Ingress port: GigabitEthernet1/0/2
List of 1 egress ports:
Table 1 Command output
Field
Total 1 entries, 1 matched
ipv6 l2-multicast
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
: Specifies an IPv6 multicast source address. If you do not specify an
: Specifies an IPv6 multicast group address. The value range for this
: Specifies an IRF member device by its member ID. If you do not specify a
: Enable
: 17
GigabitEthernet1/0/3
Status: Enable
Description
Total number of (S, G) entries in the Layer 2 IPv6 multicast fast forwarding
table, and the total number of matching entries.
fast-forwarding
VLAN
Destination port: 5432
Flag
Flag: 0x10
1
to display Layer 2 IPv6
cache [ vlan vlan-id ]
: 1
: 0x2