H3C IE4300 Command Reference Manual page 1736

: Applies the QoS policy to incoming packets.
inbound
: Applies the QoS policy to outgoing packets.
outbound
Examples
# Apply QoS policy test to the incoming traffic of VLAN 200, VLAN 300, VLAN 400, and VLAN 500.
<Sysname> system-view
[Sysname] qos vlan-policy test vlan 200 300 400 500 inbound
reset qos policy global
Use
reset qos policy global
Syntax
reset qos policy global [ inbound | outbound ]
Views
User view
Predefined user roles
network-admin
Parameters
: Specifies the QoS policy applied to the inbound direction globally.
inbound
: Specifies the QoS policy applied to the outbound direction globally.
outbound
Usage guidelines
If you do not specify a direction, this command clears statistics for the global QoS policies in both
directions.
Examples
# Clear statistics for the QoS policy applied to the inbound direction globally.
<Sysname> reset qos policy global inbound
reset qos vlan-policy
Use reset qos vlan-policy
Syntax
reset qos vlan-policy [ vlan vlan-id ] [ inbound | outbound ]
Views
User view
Predefined user roles
network-admin
Parameters
vlan vlan-id
: Specifies the QoS policy applied to incoming traffic.
inbound
: Specifies the QoS policy applied to outgoing traffic.
outbound
to clear the statistics for QoS policies applied to VLANs.
: Specifies a VLAN ID in the range of 1 to 4094.
to clear statistics for QoS policies applied globally.
29