H3C IE4300 Command Reference Manual page 1032

Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface
number. If you do not specify an interface, this command clears all relay agent statistics.
Examples
# Clear packet statistics on the DHCPv6 relay agent.
<Sysname> reset ipv6 dhcp relay statistics
Related commands
display ipv6 dhcp relay statistics
DHCPv6 client commands
display ipv6 dhcp client
Use display ipv6 dhcp client
Syntax
display ipv6 dhcp client [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number
number. If you do not specify an interface, this command displays information about all DHCPv6
clients.
Examples
# Display the DHCPv6 client information on VLAN-interface 2.
<Sysname> display ipv6 dhcp client interface vlan-interface 2
Vlan-interface2:
Type: Stateful client requesting address and prefix
State: OPEN
Client DUID: 0003000100e002000000
Preferred server:
Reachable via address: FE80::2E0:1FF:FE00:18
Server DUID: 0003000100e001000000
IA_NA: IAID 0x00000642, T1 50 sec, T2 80 sec
Address: 1:1::2/128
Preferred lifetime 100 sec, valid lifetime 200 sec
Will expire on Feb 4 2014 at 15:37:20(288 seconds left)
- : Specifies an interface by its type and
number
to display DHCPv6 client information.
: Specifies an interface by its type and
59