H3C IE4300 Command Reference Manual page 1476

Predefined user roles
network-admin
Parameters
interface-type interface-number
: Indicates that you can specify a maximum of 16 interfaces.
&<1-16>
Examples
# Configure node 10 in permit mode for routing policy policy1 to permit routes with the output
interface VLAN-interface 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match interface vlan-interface 1
if-match route-type
Use
if-match route-type
Use
undo if-match route-type
Syntax
if-match route-type { external
| internal
nssa-external-type2 } *
undo if-match
external-type2 | internal | nssa-external-type1 | nssa-external-type1or2
| nssa-external-type2 ] *
Default
No route-type match criterion is set.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
external-type1
external-type1or2
external-type2
internal
nssa-external-type1
nssa-external-type1or2
nssa-external-type2
Examples
# Configure node 10 in permit mode for routing policy policy1 to match OSPF internal routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
to set a route-type match criterion.
| nssa-external-type1
route-type
: Matches OSPF Type 1 external routes.
: Matches OSPF Type 1 and Type 2 external routes.
: Matches OSPF Type 2 external routes.
: Matches OSPF internal routes (including OSPF intra-area and inter-area routes).
: Matches OSPF NSSA Type 1 external routes.
: Matches OSPF NSSA Type 1 and 2 external routes.
: Matches OSPF NSSA Type 2 external routes.
: Specifies an interface by its type and number.
to remove the specified route-type match criterion.
-
type1 | external-type1or2 | external-type2
|
-
[ external type1
7
nssa-external-type1or2
| external-type1or2
|
|