H3C IE4300 Command Reference Manual page 1802

Use
undo authorization login
Syntax
In non-FIPS mode:
authorization
[ radius-scheme radius-scheme-name ] [ local ] [ none ] | local [ none ] |
none |
hwtacacs-scheme-name ] [ local ] [ none ] }
undo authorization login
In FIPS mode:
authorization
[ radius-scheme radius-scheme-name ] [ local ] | local | radius-scheme
radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ] [ local ] }
undo authorization login
Default
The default authorization methods of the ISP domain are used for login users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name
a case-insensitive string of 1 to 32 characters.
: Performs local authorization.
local
: Does not perform authorization. The following default authorization information applies after
none
users pass authentication:
•
Login users obtain the level-0 user role. Login users include the Telnet, FTP, SFTP, SCP, and
terminal users. Terminal users can access the device through the console port. For more
information about the level-0 user role, see RBAC configuration in Fundamentals Configuration
Guide.
•
The working directory for FTP, SFTP, and SCP login users is the root directory of the NAS.
However, the users do not have permission to access the root directory.
radius-scheme radius-scheme-name
case-insensitive string of 1 to 32 characters.
Usage guidelines
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
You can specify one primary authorization method and multiple backup authorization methods.
When the default authorization method is invalid, the device attempts to use the backup
authorization methods in sequence. For example, the
radius-scheme-name local none
method and two backup methods (local authorization and no authorization). The device performs
RADIUS authorization by default and performs local authorization when the RADIUS server is invalid.
The device does not perform authorization when both of the previous methods are invalid.
login {
radius-scheme
login {
to restore the default.
hwtacacs-scheme
radius-scheme-name
hwtacacs-scheme
: Specifies an HWTACACS scheme by its name,
: Specifies a RADIUS scheme by its name, a
authorization login radius-scheme
command specifies the default RADIUS authorization
21
hwtacacs-scheme-name
[ hwtacacs-scheme
hwtacacs-scheme-name