H3C IE4300 Command Reference Manual page 1740

Predefined user roles
network-admin
Parameters
For the description of the keywords, see
Examples
# Enter 802.1p-local priority map view.
<Sysname> system-view
[Sysname] qos map-table dot1p-lp
[Sysname-maptbl-dot1p-lp]
Related commands
display qos map-table
import
Priority trust mode commands
display qos trust interface
Use
display qos trust interface
interface.
Syntax
display qos trust interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
not specify an interface, this command displays the priority trust mode and port priorities of all
interfaces.
Examples
# Display the priority trust mode and port priority of GigabitEthernet 1/0/1.
<Sysname> display qos trust interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
Port priority information
Port priority: 0
Port dscp priority: -
Port priority trust type: none
Table 12 Command output
Field
Interface
Table 10.
to display the priority trust mode and port priorities of an
: Specifies an interface by its type and number. If you do
Description
Interface type and interface number.
33