H3C IE4300 Command Reference Manual page 1608

[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping host-tracking
Related commands
display mld-snooping host-tracking
host-tracking
mld-snooping enable
mld-snooping last-listener-query-interval
Use
mld-snooping last-listener-query-interval
interval for a VLAN.
Use
undo mld-snooping last-listener-query-interval
Syntax
mld-snooping last-listener-query-interval interval
undo mld-snooping last-listener-query-interval
Default
The MLD last listener query interval is 1 second.
Views
VLAN view
Predefined user roles
network-admin
Parameters
: Specifies an MLD last listener query interval in the range of 1 to 25 seconds.
interval
Usage guidelines
You must enable MLD snooping for a VLAN before you execute this command.
You can set the interval for a VLAN in VLAN view or globally for all VLANs in MLD-snooping view. For
a VLAN, the VLAN-specific configuration takes priority over the global configuration.
Examples
# In VLAN 2, enable MLD snooping, and set the MLD last listener query interval to 3 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping last-listener-query-interval 3
Related commands
(MLD-snooping view)
enable
last-listener-query-interval
mld-snooping enable
(MLD-snooping view)
(MLD-snooping view)
to set the MLD last listener query
36
to restore the default.