H3C IE4300 Command Reference Manual page 1477

[Sysname-route-policy-policy1-10] if-match route-type internal
if-match tag
Use
if-match tag
Use
undo if-match tag
Syntax
if-match tag tag-value
undo if-match tag
Default
No tag match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
tag-value
Examples
# Configure node 10 in permit mode for routing policy policy1 to match IGP routes that have a tag of
8.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match tag 8
route-policy
Use
route-policy
enter the view of an existing routing policy node.
Use
undo route-policy
Syntax
route-policy route-policy-name { deny | permit } node node-number
undo route-policy route-policy-name [ deny | permit ] [ node node-number ]
Default
No routing policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
route-policy-name
characters.
to match IGP routes that have the specified tag.
to restore the default.
: Specifies a tag in the range of 0 to 4294967295.
to create a routing policy and a node and enter routing policy node view, or
to remove a routing policy or a node of it.
: Specifies a routing policy name, a case-sensitive string of 1 to 63
8