H3C IE4300 Command Reference Manual page 1676

name acl-name
string of 1 to 63 characters.
Usage guidelines
This command displays ACL rules in
To specify the IPv4 ACL type, do not specify the
Examples
# Display configuration and match statistics for IPv4 basic ACL 2001.
<Sysname> display acl 2001
Basic IPv4 ACL 2001, 1 rule, match-order is auto,
This is an IPv4 basic ACL.
ACL's step is 5, start ID is 0
rule 5 permit source 1.1.1.1 0
rule 5 comment This rule is used on GigabitEthernet1/0/1.
# Display configuration and match statistics for IPv4 advanced ACL acl1_L4_IN.
<Sysname> display acl name acl1_L4_IN
Advanced IPv4 ACL named acl1_L4_IN, 1 rule,
This is a dynamic advanced IPv4 ACL.
ACL's step is 5, start ID is 0
rule 0 permit source 1.1.1.1 0
Table 1 Command output
Field
Basic IPv4 ACL 2001
1 rule
match-order is auto
This is an IPv4 basic ACL.
ACL's step is 5
start ID is 0
rule 5 permit source 1.1.1.1 0
rule 5 comment This rule is
used on GigabitEthernet1/0/1.
This is a dynamic advanced
IPv4 ACL.
display packet-filter
Use
display packet-filter
Syntax
display packet-filter interface [ interface-type interface-number ]
[ inbound | outbound ] [ slot slot-number ]
: Specifies an ACL by its name. The
config
Description
Type and number of the ACL. The following field information is about IPv4
basic ACL 2001.
The ACL contains one rule.
The match order for the ACL is auto, which sorts ACL rules in depth-first
order. This field is not displayed when the match order is config.
Description of the ACL.
The rule numbering step is 5.
The start rule ID is 0.
Content of rule 5. The rule permits packets sourced from the IP address
1.1.1.1.
Comment of rule 5.
The ACL is added dynamically by an application module.
This type of ACL can only be added, modified, or deleted by an application
module and cannot be configured through CLI commands.
to display ACL application information for packet filtering.
acl-name
or order, whichever is configured.
auto
or keyword.
ipv6 mac
7
argument is a case-insensitive