H3C IE4300 Command Reference Manual page 1565

vlan vlan-id
specify a multicast VLAN, this command displays information about multicast groups for all multicast
VLANs.
Examples
# Display detailed information about all multicast groups in multicast VLANs.
<Sysname> display multicast-vlan group verbose
Total 6 entries.
Multicast VLAN 10: Total 3 entries.
(2.2.2.2, 225.1.1.2)
Flags: 0x70000020
Sub-VLANs (1 in total):
VLAN 40
(111.112.113.115, 225.1.1.4)
Flags: 0x70000030
Sub-VLANs (1 in total):
VLAN 40
(0.0.0.0, 226.1.1.6)
Flags: 0x60000020
Sub-VLANs (1 in total):
VLAN 40
Multicast VLAN 20: Total 3 entries.
(2.2.2.2, 225.1.1.2)
Flags: 0x70000010
Sub-VLANs (0 in total):
(111.112.113.115, 225.1.1.4)
Flags: 0x70000010
Sub-VLANs (0 in total):
(0.0.0.0, 226.1.1.6)
Flags: 0x50000010
Sub-VLANs (0 in total):
Table 3 Command output
Field
Total 6 entries
Multicast VLAN 10: Total 3 entries
(0.0.0.0, 226.1.1.6)
Flags
: Specifies a multicast VLAN by its VLAN ID in the range of 1 to 4094. If you do not
Description
Total number of (S, G) entries.
Total number of (S, G) entries in multicast VLAN 10.
(S, G) entry, where 0.0.0.0 in the S position means all multicast
sources.
Entry flag.
This field displays one flag or the sum of multiple flags. For
example, the value 0x70000020 means that the entry has flags
0x20, 0x10000000, 0x20000000, and 0x40000000.
The following flags are available for an entry:
•
0x10—The entry is created by the multicast VLAN.
•
0x20—The entry is created by the sub-VLAN of the
multicast VLAN.
•
0x40—The entry is to be deleted.
4