H3C IE4300 Command Reference Manual page 1642

Syntax
ipv6 port multicast-vlan vlan-id
undo ipv6 port multicast-vlan
Default
A port does not belong to an IPv6 multicast VLAN.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
: Specifies an IPv6 multicast VLAN by its VLAN ID in the range of 1 to 4094.
vlan-id
Usage guidelines
You can assign a port to only one IPv6 multicast VLAN.
For the port to be assigned to an IPv6 multicast VLAN, you must enable MLD snooping for the VLAN
to which the port belongs.
Examples
# Assign GigabitEthernet 1/0/1 to IPv6 multicast VLAN 100.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] ipv6 port multicast-vlan 100
port (IPv6 multicast VLAN view)
Use
port
Use
undo port
Syntax
port interface-list
undo port { all | interface-list }
Default
An IPv6 multicast VLAN does not have user ports.
Views
IPv6 multicast VLAN view
Predefined user roles
network-admin
Parameters
interface-list
port range in the form of
interface-number
: Specifies all user ports in the current IPv6 multicast VLAN.
all
to assign user ports to an IPv6 multicast VLAN.
to delete user ports from an IPv6 multicast VLAN.
: Specifies a port in the form of
interface-type interface-number
.
interface-type interface-number
7
, or a
to
interface-type