Timer Triggered - H3C IE4300 Command Reference Manual

Syntax
summary
undo summary
Default
Automatic RIPv2 route summarization is enabled.
Views
RIP view
Predefined user roles
network-admin
Usage guidelines
Automatic RIPv2 route summarization can reduce the routing table size to enhance the scalability
and efficiency for large networks.
Examples
# Disable automatic RIPv2 route summarization.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] undo summary
Related commands
rip summary-address
rip version

timer triggered

Use
timer triggered
Use
undo timer triggered
Syntax
timer
[ incremental-interval ] ]
undo timer triggered
Default
The maximum interval is 5 seconds, the minimum interval is 50 milliseconds, and the incremental
interval is 200 milliseconds.
Views
RIP view
Predefined user roles
network-admin
Parameters
maximum-interval
minimum-interval
incremental-interval
milliseconds.
to set the interval for sending triggered updates.
to restore the default.
triggered maximum-interval
: Specifies the maximum interval in the range of 1 to 5 seconds.
: Specifies the minimum interval in the range of 10 to 5000 milliseconds.
: Specifies the incremental interval in the range of 100 to 1000
37
[ minimum-interval