H3C IE4300 Command Reference Manual page 1821

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
: Specifies the local user type.
class
: Device management user.
manage
: Network access user.
network
idle-cut { disable | enable }
service-type
: FTP users.
ftp
: HTTP users.
http
: HTTPS users.
https
lan-access
users.
: Portal users.
portal
: SSH users.
ssh
: Telnet users.
telnet
: Terminal users that log in through console ports.
terminal
state { active | block }
state can access network services, but a local user in blocked state cannot.
user-name user-name
must be a case-sensitive string of 1 to 55 characters. The name must meet the following
requirements:
•
Cannot contain the domain name.
•
Cannot contain any of the following characters: forward slash (/), backslash (\), vertical bar (|),
colon (:), asterisk (*), question mark (?), left angle bracket (<), right angle bracket (>), or at sign
(@).
•
Cannot be a, al, or all.
vlan vlan-id
4094.
Usage guidelines
If you do not specify any parameters, this command displays information about all local users.
Examples
# Display information about all local users.
<Sysname> display local-user
Device management user root:
State:
Service type:
Access limit:
Current access number:
: Specifies the local users that use a specific type of service.
: LAN users that typically access the network through an Ethernet, such as 802.1X
: Specifies local users in active or blocked state. A local user in active
: Specifies all local users using the specified username. The username
: Specifies all local users in a VLAN. The
Active
SSH/Telnet/Terminal
Enabled
1
: Specifies local users by the status of the idle cut feature.
vlan-id
Max access number: 3
40
argument is in the range of 1 to