H3C IE4300 Command Reference Manual page 1576

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group ipv6-group-address
not specify an IPv6 multicast group, this command displays Layer 2 IPv6 multicast IP forwarding
entries for all IPv6 multicast groups.
source ipv6-source-address
do not specify an IPv6 multicast source, this command displays Layer 2 IPv6 multicast IP forwarding
entries for all IPv6 multicast sources.
vlan vlan-id
VLAN, this command displays Layer 2 IPv6 multicast IP forwarding entries for all VLANs.
slot slot-number
member device, this command displays Layer 2 IPv6 multicast IP forwarding entries for the master
device.
Examples
# Display Layer 2 IPv6 multicast IP forwarding entries for VLAN 2.
<Sysname> display ipv6 l2-multicast ip forwarding vlan 2
Total 1 entries.
VLAN 2: Total 1 entries.
(::, FF1E::101)
Host ports (3 in total):
GigabitEthernet1/0/1
GigabitEthernet1/0/2
GigabitEthernet1/0/3
Table 3 Command output
Field
Total 1 entries
VLAN 2: Total 1 entries
(::, FF1E::101)
Host ports (3 in total)
display ipv6 l2-multicast mac
Use
display ipv6 l2-multicast mac
MAC multicast groups.
Syntax
display ipv6 l2-multicast mac [ mac-address ] [ vlan vlan-id ] [ slot
slot-number ]
: Specifies an IPv6 multicast group by its IPv6 address. If you do
: Specifies an IPv6 multicast source by its IPv6 address. If you
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a
: Specifies an IRF member device by its member ID. If you do not specify a
Description
Total number of Layer 2 IPv6 multicast IP forwarding entries.
Total number of Layer 2 IPv6 multicast IP forwarding entries in VLAN 2.
(S, G) entry, where a double colon (::) in the S position means all IPv6
multicast sources.
Member ports and total number of member ports.
to display information about Layer 2 IPv6 multicast
4